CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE COMMUNICATION
Before the F-code communication function can be used, special memory boxes must be created using "F-Code Memory Box" in the system settings.
A box name and F-code (sub-address and passcode) are programmed in each box, and an F-code communication function is assigned to each box.
After you have created a memory box, inform the other party of the sub-address and passcode of the box.
Memory box for F-code communication
•Box Name
•Sub Address
•Passcode
•End receiving machines (only in an F-code relay broadcast memory box)
•Print PIN (only for F-code confidential reception)
To use the following F-code communication functions, F-code memory boxes must be created in your machine. F-code confidential reception, F-code polling memory, F-code relay broadcast transmission
To use the following F-code communication functions, F-code memory boxes must be created in the other machine. F-code confidential transmission, F-code polling reception, F-code relay request transmission
System Settings: F-CODE MEMORY BOX (page 179)
This is used to configure memory boxes for F-code communication.
•Up to 100 memory boxes can be created.
•The memory box name cannot be longer than 18 characters, and the sub-address and passcode cannot be longer than 20 digits.
F-CODE DIALING
When performing an F-code operation, the F-code (sub-address and passcode) is appended to the fax number that is dialed. Check the F-code (sub-address and passcode) programmed in the memory box in the other machine before you perform an F-code transmission. It is convenient to store an F-code together with the fax number in a one-touch key or group key.
0123456789 / AAAAAAAA / XXXXXXXX
Fax number of other * | Sub Address | * | Passcode | * Touch the [Sub Address] key |
machine | | | | in the screen to enter "/". |
When the following F-code functions are used, your machine dials the other machine.
F-code confidential transmission, F-code polling reception, F-code relay request transmission When the following F-code functions are used, the other machine dials your machine.
F-code confidential reception, F-code polling memory, F-code relay broadcast transmission
• If the destination machine does not have a passcode configured in the F-code, do not enter a passcode when dialing that machine.
• F-code communication cannot be performed when using the speaker or performing manual transmission.
System Settings: ADDRESS BOOK (page 174)
This is used to store and edit one-touch keys and group keys.
