Sharp MX-M1100, MX-M850, MX-M950 manual 127

		(1), (2)		(3)
Original				OK
Size Input			Cancel	OK
17
		X
			inch
			(2 1/2~17)
	Y	11
			inch
			(2 1/2~11 5/8)

2

Enter the original size.

(1)Enter the X (horizontal) dimension of the original.

With the [X] key highlighted, enter the X (horizontal)

dimension of the original with the keys. When the document glass is used, a number from 2-1/2" to 17" (64 mm to 432 mm) can be entered.

When the automatic document feeder is used, a number from 5-1/2" to 17" (140 mm to 432 mm) can be entered. If the horizontal dimension of the original is less than 5-1/2" (140 mm), use the document glass.

(2)Enter the Y (vertical) dimension of the original.

Touch the [Y] key and enter the Y (vertical) dimension of

the original with the keys. When the document glass is used, a number from 2-1/2" to 11-5/8" (64 mm to 297 mm) can be entered.

When the automatic document feeder is used, a number from 5-1/2" to 11-5/8" (140 mm to 297 mm) can be entered.

If the vertical dimension of the original is less than 5-1/2" (140 mm), use the document glass.

(3) Touch the [OK] key.

You will return to the base screen.

Make sure that the entered dimensions appear in the [Original] key.

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and delete special original sizes.

Storing original sizes (editing/clearing)

Up to 12 special original sizes can be stored.

Touch the [Original] key in the base screen of copy mode and then follow the steps below.

Touch the [Custom Size] key.

	Original					OK
		Auto		8½x14
		Manual
1
		5½x8½		8½x11R	11x17	AB
		5½x8½R	8½x13(216x330)		8½x1325(216x340)
						Inch
		8½x11		8½x14
		Size Input			Custom Size

31