(8)Paper select display

This shows the size of paper loaded in each tray.

For the bypass tray, the paper type appears above the paper size.

The selected tray is highlighted.

The approximate amount of paper in each tray is

indicated by . Trays 1 to 7 can be touched to open the same screen as when the [Paper Select] key is

touched.

☞PAPER TRAYS (page 14)

(9)Number of copies display

This shows the number of copies set.

(10)[Special Modes] key

Touch this key to select special modes such as Margin Shift, Edge Erase, and Dual Page Copy.

☞SPECIAL MODES (page 43)

(11)[2-Sided Copy] key

Touch this key to select the 2-sided copying function.

☞AUTOMATIC 2-SIDED COPYING (page 19)

(12)[Output] key

Touch this to select an output function such as sort, group, offset, staple sort, saddle stitch, punch, or paper folding.

☞OUTPUT (page 34)

(13)Customized keys

The keys that appear here can be changed to show settings or functions that you prefer. The following keys appear by factory default:

☞Customizing displayed keys (page 8)

[File] key, [Quick File] key

Touch one of these keys to use the File function or Quick File function of document filing mode. These are the same [File] and [Quick File] keys that appear when the [Special Modes] key is touched. For information on the document filing function, see the "Document Filing Guide".

The screen explained in this section appears when a finisher, punch module, saddle unit, folding unit, inserter, large capacity trays, and bypass tray are installed. The image will vary depending on the equipment installed.

7