Sharp MX-M1100, MX-M850, MX-M950 manual 391

Specifying the original scan size (by paper size)

If you place a non-standard size original or wish to change the scan size, you must touch the [Original] key and specify the original size manually. Follow the steps below after placing the original in the document feeder tray or on the document glass.

Select the mode and display the image settings screen.

(1) Touch the tab of the mode that you wish to use.

1 (2) Touch the [Original] key.

The automatically detected original size appears to the right of the [Original] key.

☞IMAGE SETTINGS (page 68)

Scan/Original			OK
	Scan Size		100% Send Size
	Auto	8½x11	Auto
2			Image Orientation
2-Sided	2-Sided
Booklet	Tablet

Touch the [Scan Size] key.

			(1)				(2)		Specify the scan size.
									(1) Touch the appropriate original size key.
	Scan/Original							OK
									(2) Touch the [OK] key.
		Auto
		Manual			Manual
		5½x8½			8½x11R	11x17
								AB
		5½x8½R		8½x13(216x330)		8½x1325(216x340)
								Inch
		8½x11			8½x14	Long Size
3
		Size Input

• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 31-1/2" (800 mm) (the maximum height is 11" (297 mm)).

•When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. Scanning will take place in mono2.

•To specify an AB size for the scan size, touch the [ABInch] key to highlight the [AB] side and then specify the scan size.

Scan/Original		OK
	Scan Size	100% Send Size
	5½x8½	Auto
4		Image Orientation
2-Sided	2-Sided
Booklet	Tablet

Touch the [OK] key.

71