Select copy settings and then press the [START] key (
).
•Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved.
•To prevent accidental saving of the document, the message "The scanned data is stored in the quick file folder." appears for 6 seconds (default setting) after the [START] key ( 
) is pressed.
The message display time can be changed using "Message Time Setting" in the system settings (administrator).
4 • If you inserted the original pages in the document feeder tray, all pages are scanned.
•If you placed the original on the document glass, scan each page one page at a time.
When scanning of one page finishes, replace it with the next page and press the [START] key ( 
). Repeat until all pages have been scanned and then press the
To cancel scanning...
Press the [STOP] key ( 
).
• When a file is stored using Quick File, the following user name and file name are automatically assigned to the file. User Name: User Unknown
File Name:
Stored to: Quick File Folder
When user authentication is used, the user name that was used for login is automatically selected. Only the file name and location of a file stored in the Quick File Folder can be changed.
•The storage format used for Quick File is specified by "Default Storage Format Setting" in the system settings (administrator). "Default Storage Format Setting" is initially set to
To cancel Quick File...
Touch the [Quick File] key in the screen of step 2 so that it is no longer highlighted.
15