STORING SENDER INFORMATION

Before using Scan to E-mail

Store a default sender name in "Sender Name" and a reply e-mail address in "Reply E-mail Address". These will be used when a sender is not selected.

System Settings (Administrator): Default Sender Set

This is used to store the sender name and e-mail address that is used when a sender is not selected.

Before using the Internet fax function

Store a sender name in "Sender Name" and a sender Internet fax address in "Own Address".

System Settings (Administrator): I-Fax Own Name and Address Set (Internet Fax Default Settings)

Use this setting to program the sender name and sender address.

Before using the fax function

Store the user name and fax number in "Fax Own Name and Number Set".

System Settings (Administrator): Fax Own Name and Number Set (Fax Default Settings)

Use this setting to program the sender name and sender fax number.

SETTINGS REQUIRED IN THE WEB PAGES

To use scan mode and Internet fax mode, the basic network scanner settings, server settings such SMTP and DNS server settings, and sender addresses must be configured in the Web pages.

•Server settings

To configure server settings, click [Network Settings] and then [Service Settings] in the Web page menu. (Administrator rights are required.)

•Network scanner settings

To configure the network scanner settings, click [Application Settings] and then [Network Scanner Settings] in the Web page menu. (Administrator rights are required.)

•Internet Fax settings

To configure the network scanner settings, click [Application Settings] and then [Internet Fax Settings] in the Web page menu. (Administrator rights are required.)

10