Loading tab paper and transparency film

In addition to plain paper, tab paper and transparency film can also be loaded in the large capacity trays (MX-LCX5). This section explains the procedures for loading tab paper and transparency film, and points to note.

Loading tab paper

To use tab paper, the special guide must be attached as explained below.

Take out the tab paper guide.

1 The guide is stored inside the large capacity trays (MX-LCX5). Open the cover and take out the guide. When finished using tab paper, be sure to replace the guide.

Adjust the paper guide to the tab paper size and load tab paper.

To adjust the paper guide, see Loading paper and changing the paper size (page 40).

Place the tab paper with the print side face up so that the tab is to the right.

2 [Example]

Make sure that the positions of the tabs correspond with the originals as shown below.

Originals

ABC

DEF

 

GHI

 

JKL

1st sheet

2nd sheet 3rd sheet 4th sheet

Tab paper

Bottom

1st sheet

Front

side

 

 

Top

 

 

 

 

2nd sheet 3rd sheet 4th sheet

Attach the guide to the tray.

Attach the guide over the paper.

3

4

Gently push the tray in and set the paper type to tab paper.

Change the paper type setting to tab paper as explained in "PAPER TRAY SETTINGS" (page 77) in the System Settings.

Loading transparency film

When loading transparency film, load the film in the vertical orientation with the rounded corner at the top right.

42