Sharp MX-M1100, MX-M850, MX-M950 manual 437

						(2)
	Internet Fax/Original									OK
			Scan Size				100%	Send Size
			Auto		8½x11			Auto
6
									Image Orientation
		2-Sided		2-Sided
		Booklet		Tablet

(1)

Specify the orientation in which the original is placed.

(1)Touch the "Image Orientation" key with the same orientation as the original image.

If this setting is not correct, a suitable image may not be transmitted.

(2) Touch the [OK] key.

Press the [START] key ().

Scanning begins.

•If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished.

•If you are scanning the original on the document glass, scan each page one page at a time.

When scanning finishes, place the next original and press the [START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key.

7 A beep will sound to indicate that scanning is finished.

The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be changed.)

To cancel scanning...

Press the [STOP] key ( ) to cancel the operation.

• Transmission is not possible at a size smaller than the original size.

• The 2in1 function cannot be used when the original is other than 8-1/2" x 11" or 5-1/2" x 8-1/2" (A4, B5, or A5) size.

•When the scan size of the original is specified by numerical values, this function cannot be used.

•Fax mode:

This function cannot be used in direct transmission mode or when the speaker is used to dial.

To cancel 2in1...

Touch the [2in1] key in the screen of step 4 so that it is not highlighted.

117