POLLING MEMORY TRANSMISSION USING F-CODES

When your machine receives a transmission request from another machine, this function sends a fax stored in an F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code configured in your machine or transmission will not take place.

The document to be transmitted must be scanned into an F-code polling memory box.

Transmission request (polling) using an F-code

The other

Sub-address: AAAAAAAA

 

Passcode: XXXXXXXX

The machine

machine

 

F-code polling memory box

 

 

Box name: BBBB

Sub-address: AAAAAAAA

Passcode: XXXXXXXX

Transmission

System Settings: F-CODE MEMORY BOX (page 179)

This is used to create memory boxes (polling memory) for F-code polling memory transmission.

A memory box name, sub-address, and passcode are programmed in each box.

SCANNING A DOCUMENT INTO A MEMORY BOX FOR F-CODE POLLING TRANSMISSION

Follow these steps to scan a document into a memory box (polling memory) for F-code polling transmission.

A document cannot be scanned into a memory box while it is in use for communication.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

 

 

 

 

 

Select the special modes.

2

(1)

Touch the [Special Modes] key.

 

SPECIAL MODES (page 87)

 

 

 

(2)

Touch the

keys to switch through the screens.

 

(3)

Touch the [Memory Box] key.

 

 

 

 

138