Sharp MX-M1100, MX-M850, MX-M950 manual 123

MANUALLY SELECTING THE RATIO (Preset ratios/Zoom)

Touch the [Copy Ratio] key in the base screen of copy mode to select one of four preset enlargement ratios or four preset reduction ratios (maximum 400%, minimum 25%).

In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.

Set the ratio.

Touch a preset ratio key and/or the zoom keys to set the ratio.

There are two setting screens. Use the

keys to switch

between the screens.

● 1st screen

• Enlargement keys (2 ratios): 121% and 129%

Copy Ratio

OK

• Reduction keys (2 ratios): 64% and 77%

• [100%] key

100

11x17

8½x11

%

64%

121%

8½x14

11x17

8½x11

5½x8½

1

11x17

8½x14

8½x11

11x17

2

Zoom

77%

129%

8½x14

8½x11

5½x8½

8½x11

100%

Auto Image

XY Zoom

● 2nd screen

(A)

1
	Copy	Ratio							OK
						100
				%
			25%		200%
										2
										2
			50%		Zoom			400%
			75%					300%
				100%
			150%					350%

•Enlargement keys (2 to 4 ratios) 200%, 400%, any ratio (max. of two)

•Reduction keys (2 to 4 ratios) 25%, 50%, any ratio (max. of two)

•[100%] key

Auto Image XY Zoom

•(A) keys

The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings (administrator).

•To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then use the zoom keys for fine adjustment.

•The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.

Touch the key to increase the ratio, or the key to decrease the ratio. (If you continue to touch the / key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)

•If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image may not fit on the paper.

27