Select the special modes.
If the base screen is not displayed, touch the [Condition Settings] key.
(1) | Make sure that the desired mode is selected. |
| If the desired mode is not selected, touch the tab of that mode. |
(2) | Touch the [Special Modes] key. |
3 (3) | Touch the [Suppress Background] key. |
Read the message that appears and then touch the [OK] key.
☞SPECIAL MODES (page 87)
When you return to the base screen after specifying the destination, the base screen of the mode of the specified destination appears.
(1) |
| (2) | |
|
|
|
|
Scan/Special Modes |
| OK | |
Suppress Background | Cancel | OK | |
Light areas of the original may be suppressed as background.
4
13
Select the suppress background setting.
(1) Adjust the background suppression level.
Touch the [+] key to suppress only faint background. Touch the
(2) Touch the [OK] key.
Press the [START] key (
).
Scanning begins.
•If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished.
•If you are scanning the original on the document glass, scan each page one page at a time.
When scanning finishes, place the next original and press the [START] key (
). Repeat until all pages have been scanned and then touch the
5 A beep will sound to indicate that scanning is finished.
When the original is scanned in [Mono2], the suppress background function will not operate.
To cancel scanning...
Press the [STOP] key ( 
) to cancel the operation.
To cancel the background suppression setting...
Touch the [Cancel] key in the screen of step 4.
101