INSERTER

The inserter can be used to insert blank or pre-printed paper in printed output as inserts or covers without printing on the inserts/covers.

In addition, the paper loaded in the inserter can be directly fed to peripheral devices such as the finisher or saddle unit for stapling or punching.

☞MANUAL FINISHING MODE (page 65)

For details on paper, see the specifications in the Safety Guide and "PAPER TRAY SETTINGS" (page 77) in the system settings.

(1) Paper trays (upper/lower)

(1)

(2)

(3)

(4)

(5)

Place blank or pre-printed paper that you wish to insert here. Up to 200 sheets can be placed on each tray.

(2) Paper guide

When loading paper, adjust this guide to the size of the paper. To move the guide, squeeze the guide lock lever.

(3) Paper inserter cover

Open this cover to remove a paper misfeed. There is also a lower cover.

(4) Front paper feeder cover

(6)

Open this cover to remove a paper misfeed.

(5) Right-side cover

Open this cover to remove a paper misfeed.

(6) Cover

Open this cover to remove a paper misfeed.

An inserter is required to install a finisher (MX-FNX5).

62