Sharp MX-M1100, MX-M850, MX-M950 manual 368

SENDING A FAX IN INTERNET FAX MODE

When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added. To switch to Internet fax mode, touch the [Cancel] key in the touch panel and follow the steps below.

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation (), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually.

•Image rotation

8-1/2" x 11" and 5-1/2" x 8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in

18-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5) originals cannot be rotated for transmission.

Transmission

•Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission.

System Settings (Administrator): Rotation Sending Setting

This is used to select whether or not a scanned original image is rotated before transmission.

The factory default setting is: rotate 8-1/2" x 11" to 8-1/2" x 11"R, and 5-1/2" x 8-1/2"R to 5-1/2" x 8-1/2" (A4 to A4R, B5R to B5, and A5R to A5).

(4)

(3)

(2)

5

10

15

To

Cc

Condition

Settings

AAA AAA

BBB BBB

1

Address Review

2

CCC CCC

DDD DDD

Address Entry

EEE EEE

FFF FFF

Global

Address Search

GGG GGG

HHH HHH

III III

JJJ JJJ

2

Frequent Use

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

Auto Reception

Sort Address

Fax Memory:100%

Specify the destination.

(1)Touch the [Address Book] key in the base screen.

(2)Touch the key of the desired destination.

The icon appears in one-touch keys in which Internet fax addresses are stored.

(3) Touch the [To] key.

The destination is specified.

(4) Touch the [Condition Settings] key.

•After a one-touch key is touched, if the screen is changed without touching the [To] key, the destination is automatically specified.

•In addition to specification by a one-touch key, a destination can also be specified by a search number. You can also manually enter a destination or look up a destination in a global address book. For more information, see "2. ENTERING DESTINATIONS" (page 25).

48