Sharp MX-M1100, MX-M850, MX-M950 manual 155

USING A DIFFERENT PAPER TYPE FOR COVERS (Covers/Inserts)

A different type of paper can be inserted in positions corresponding to front and back covers of a copy job when the automatic document feeder is used. A different type of paper can also be automatically added as an insert at specified pages.

Example of adding covers				Example of adding inserts
	Originals				Originals
			Back
			cover
		Front cover

Inserts

Example of adding covers/inserts

Originals

Back cover

Front cover

About the explanations of covers and inserts

There are various ways of using covers and inserts. To keep the explanations simple, covers and inserts are explained separately. For specific examples, see "Examples of covers and inserts" (page 135).

Inserts

Preparations for using covers and inserts

•Load the cover/insert paper in the tray before using the cover/insert function.

•Before selecting the cover/insert function, place the originals in the document feeder tray, select 1-sided or 2-sided copying, and select the number of copies and any other desired copy settings. When these settings have been completed, perform the procedure to select covers/inserts.

•The originals must be scanned using the automatic document feeder. The document glass cannot be used.

•For covers, only one sheet can be inserted for the front cover and only one sheet can be inserted for the back cover. For inserts, up to 100 sheets can be inserted. Note that two insert sheets cannot be inserted between the same two pages.

•When performing 2-sided copying of 2-sided originals, an insert cannot be inserted between the front and reverse sides of an original.

•Covers/inserts cannot be inserted in transparency film and other media that cannot be turned over before output. (However, when the inserter is used without performing cover or insert copying, insertion is possible.)

59