OTHER PROBLEMS
Problem |
| Point to check | Solution |
|
|
|
|
The touch panel |
| Is the display contrast properly | Touch the brightness adjustment key ( ) on the |
screen is difficult to |
| adjusted? | system bar in the touch panel to adjust the brightness. |
view. |
|
| ☞ SYSTEM BAR (page 15) |
You were logged out |
|
|
|
| Did Auto Clear activate? | When user authentication is used, the currently logged | |
without having |
|
| in user will be automatically logged out if Auto Clear |
performed logout |
|
| activates. (Except when in PC scan mode.) |
yourself. |
|
| Log in again. |
|
|
| If you are the administrator, you can change the time |
|
|
| setting of Auto Clear or disable Auto Clear in "Auto |
|
|
| Clear Setting". |
|
|
| ➞ System Settings (Administrator) > "Operation |
|
|
| Settings" > "Other Settings" > "Auto Clear Setting" |
You forgot the |
|
|
|
| Was the administrator password | Contact your dealer or nearest SHARP Service | |
administrator |
| changed from the factory default | Department. |
password. |
| setting? | * For the factory default administrator password, see |
|
|
| "TO THE ADMINISTRATOR OF THE MACHINE" in |
|
|
| the Safety Guide. After changing the password, take |
|
|
| special care to remember it. |
|
|
|
|
93