SENDING AN IMAGE IN USB MEMORY MODE

Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device.

• Consult your dealer or retailer for USB memory devices that can be used.

• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.

Connect the USB memory to the USB connector (Type A) on the machine.

1

Place the original.

• When placing the originals, orient them as shown below.

 

Originals

Document feeder tray

 

Place the original face up.

 

 

 

Portrait orientation*

 

2

A

A

B

B

 

Landscape orientation

 

 

A B

A B

Document glass

Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale.

A

B

AB

*To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 4.

•Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (). If placed in landscape (horizontal) orientation (), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually.

•Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission.

43