*1 | Only effective when a finisher or saddle stitch finisher is installed. |
|
|
|
|
| |||||||
*2 | This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is | ||||||||||||
| normally no need to change this setting. Information on the selections is shown in "Selections for the line thickness | ||||||||||||
| setting" (Table below). |
|
|
|
|
|
|
|
|
|
|
| |
*3 | Paper sizes that can be used with this function are 11" x 17", | ||||||||||||
| may not take effect with some print methods.) |
|
|
|
|
|
|
|
| ||||
*4 | Only effective when printing PDF, JPEG, and TIFF files. |
|
|
|
|
|
| ||||||
*5 | Can only be selected when [1 Staple at Back] is selected. |
|
|
|
|
| |||||||
*6 | Only effective when a punch module is installed on a finisher or saddle stitch finisher. |
|
|
| |||||||||
*7 | Can only be selected when a folding unit is installed. |
|
|
|
|
|
| ||||||
Selections for the line thickness setting |
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Selection | 0 | 1 | 2 |
| 3 |
| 4 | 5 | 6 | 7 | 8 | 9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Percentage | Minimum | 50% | 75% |
| 90% |
| 95% | 100% | 105% | 110% | 125% | 150% | |
line width* |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* All lines are the minimum line width.
PCL SETTINGS
This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Item | Description |
| Selections | |
|
|
| ||
PCL Symbol Set Setting | Specify the symbol set used for | Select from 35 items. | ||
printing. |
|
| ||
|
|
| ||
|
|
| ||
| Use this to select the font used for | • Internal Font | ||
PCL Font Setting | printing. | • Extended Font | ||
| (List of internal fonts when extended fonts are not | |||
|
| |||
|
| installed.) | ||
|
|
| ||
| This setting is used to select how | • 0.CR=CR; LF=LF; FF=FF | ||
PCL Line Feed Code | the printer responds when a line | • 1.CR=CR+LF; LF=LF;FF=FF | ||
feed command is received. | • 2.CR=CR; LF=CR+LF; FF=CR+FF | |||
| ||||
|
| • 3.CR=CR+LF; LF=CR+LF; FF=CR+FF | ||
|
|
|
| |
| When this is enabled, 80 | • | (Enabled) | |
| characters per line can be printed | • | (Disabled) | |
Wide A4 | on A4 size paper using a |
|
| |
font. (When this setting is |
|
| ||
|
|
| ||
| disabled, up to 78 characters can |
|
| |
| be printed per line.) |
|
| |
|
|
|
| |
POSTSCRIPT SETTING
When a PS (PostScript) error occurs during PostScript printing, this setting determines whether or not an error notice is printed.
This setting can be configured when the PS3 expansion kit is installed.
75