2 LOADING PAPER

IMPORTANT POINTS ABOUT PAPER

This section provides information that you should know before loading paper in the paper trays. Be sure to read this section before loading paper.

NAMES AND LOCATIONS OF TRAYS

The trays are identified by the names indicated below. For the names of the peripheral device trays, see "TRAY LOCATIONS AND NAMES" (page 35). For detailed information on the sizes and types of paper that can be loaded in each tray of the machine, see the specifications in the Safety Guide and "PAPER TRAY SETTINGS" (page 77) in the System Settings. For information on the peripheral device trays, see "TRAY LOCATIONS AND NAMES" (page 35).

Tray 1

Tray 2

Tray 3

Tray 4

THE MEANING OF "R" IN PAPER SIZES

Some original and paper sizes can be placed in either the vertical or the horizontal orientation. To differentiate between vertical and horizontal orientations, paper sizes in the horizontal orientation will be followed by an "R" (for example, 8-1/2" x 11"R, A4R).

Sizes that can be placed only in the horizontal orientation (12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", A3W, A3, B4) do not include the "R" in their size indication.

 

 

 

 

 

8-1/2" x 11"R

 

8-1/2" x 11"

 

11" x 17"

(A4R)

 

(A4)

 

(A3)

 

 

 

 

 

 

 

 

 

 

Horizontal orientation

Vertical orientation

Can be placed only in the

"R" is appended.

"R" is not appended.

horizontal orientation

 

 

"R" is not appended.

26