User Authentication | OK | |
Login Name |
|
|
User Name | User 0001 |
|
Password |
|
|
Auth to: | Login Locally |
|
4
(Different items will appear in the screen when LDAP authentication is used.)
Touch the [OK] key.
After the entered login name and password are authenticated, the user count screen will appear briefly.
Usage status: used/remaining pages
Full color : 87,654,321/12,345,678
Single color: 87,654,321/12,345,678
When page limits have been set in "Pages Limit Group List" in the system settings (administrator), the number of pages remaining will appear. (The remaining number of pages that the user can use in each mode (copy, scan, etc.) appears.) The amount of time that this screen appears can be changed using "Message Time Setting" in the system settings (administrator).
When you have finished using the machine and are ready to log out, press the [LOGOUT] key (
).
LOGOUT
5
• However, note that the [LOGOUT] key ( 
) cannot be used to log out when a fax number is being entered in fax mode, as the key is used for fax number entry.
•If a preset duration of time elapses after the machine is last used, the Auto Clear function will activate. When Auto
Clear activates, logout takes place automatically. However, when PC Scan mode is used, logout does not take place when the [LOGOUT] key ( 
) is pressed and Auto Clear does not operate. Change to a different mode on the machine and then log out.
If an incorrect login name or password is entered 3 times in a row...
If "A Warning when Login Fails" is enabled in the system settings (administrator), the machine will lock for 5 minutes if an incorrect login name or password is entered 3 times in a row.
Verify the login name and password that you should use with the administrator of the machine.
• The administrator can clear the locked state.
This is done from [User Control] and then [Other Settings] in the Web page menu.
•When LDAP authentication is used, the
A text entry screen will appear. Enter your
User Authentication | OK |
Login Name
User Name User 0002
Password
Auth to: Server 2
System Settings (Administrator): User Registration
This is used to store names of users of the machine. Detailed information such as the login name, user number, and password are also stored. Ask the administrator of the machine for the information that you need to use the machine.
24