(1)

 

Attach the paper size guide and

(2)

transparent sheet appropriately for the

LT

 

size of paper to be used.

A4

 

 

A4

(1) Align the bottom of the paper size guide with

 

LT

 

 

the appropriate slot on the base of the tray.

 

 

Align the paper size guide with the slot for the paper size

 

 

to be used (indicated by the paper size mark).

(2) Align the holes at the top of the paper size

Transparent sheetguide with the protrusions that secure the paper size guide.

 

Align with the holes for the paper size to be used

2

(indicated by the paper size mark).

(3) Push in the paper guide so that it locks into

 

place.

Push the paper size guide in until the hook at the bottom locks into place. (You will hear a "click" when the hook locks.) Move the paper size guide slightly to verify that it has locked into place.

When attaching the paper size guide, make sure that the top and bottom of the guide are aligned to the same paper size. If the top and bottom of the paper size guide are not aligned to the same paper size, skewed feeding and misfeeds will result.

• When attaching the paper size guide, place the transparent sheet in direct contact with the base of the tray in the correct orientation as shown.

• The slot or hole with the "LT" mark is for 8-1/2" x 11" size.

Transparent sheet

3

Repeat steps 1 and 2 to adjust the far paper guide to the paper size to be used.

Be sure to adjust the far paper guide to the same size as the near paper guide.

When removing and attaching the far paper size guide, take care not to hit the front cover of the machine.

Adjusting only one paper guide may result in skewed feeding or misfeeds.

Set the paper size and paper type.

Be sure to change the paper size and paper type settings as explained in "PAPER TRAY SETTINGS" (page 77) in the

4 System Settings.

If the paper size setting is not configured correctly, automatic paper selection will not operate correctly and printing may take place on the wrong size or type of paper or a misfeed may occur.

Do not place heavy objects on the tray or press down on the tray.

31