Sharp MX-M1100, MX-M850, MX-M950 manual 178

		(1)						(2)
Special Modes									OK
Card Shot						Cancel			OK
	X		3	38	(1~8 1/2)		Fit to		(A)
					inch
							Page
	Y		2	18	inch
					(1~8 1/2)

Size Reset (B)

4

Select card shot settings.

(1) Enter the original size.

With the [X] key highlighted, enter the X (horizontal)

dimension of the original with the keys.

Touch the [Y] key and enter the Y (vertical) dimension of

the original with the keys.

(A)To enlarge or reduce the images to fit the paper based on the entered original size, touch the [Fit to Page] key.

(B)The [Size Reset] key can be pressed to return the horizontal and vertical dimensions to the values set in "Card Shot Settings" in the system settings (administrator).

(2)Touch the [OK] key.

You will return to the base screen of copy mode. Make sure that the entered dimensions appear in the [Original] key.

Press the [START] key () to scan the front side of the card.

5

To cancel scanning...

Press the [STOP] key ( ).

Turn the card over and press the [START] key () to scan the reverse side of the card.

6

To cancel scanning...

Press the [STOP] key ( ).

Touch the [Read-End] key.

Place next original. Press [Start].	Copying will begin.
When finished, press [Read-End].

7 Read-End

To cancel copying...

Press the [STOP] key ( ).

• The original must be placed on the document glass.

• Copying is only possible on standard size paper.

•XY Zoom cannot be used when using this function.

•The image cannot be rotated when using this function.

To cancel card shot...

Touch the [Cancel] key in the screen of step 4.

System Settings (Administrator): Card Shot Settings

This is used to set the values to which the size returns when the [Size Reset] key is pressed. 1" to 8-1/2" (25 mm to 210 mm) can be entered for both the horizontal and vertical dimensions.

The factory default settings are 3-3/8" (86 mm) for X (the width) and 2-1/8" (54 mm) for Y (the height).

82