STATUS INDICATORS
There are status indicators at the top of the operation panel.
There are both red and green indicators, and these light or blink to indicate the machine's status.
Green indicator | Red indicator |
About status indicator lighting and blinking
The status indicators light or blink to indicate the following conditions.
|
| Green indicator | |
| Red indicator |
|
|
| Pattern 1 | Pattern 2 | |
|
| ||
|
| (Job status display) | (Machine status display) |
|
|
|
|
| A problem exists but the machine | Job in progress | Standby |
Lights | can be used. | (During paper feeding and |
|
(The toner cartridge is out of toner | output.) |
| |
solidly |
| ||
and the machine is using the spare |
|
| |
|
|
| |
| toner, etc.) |
|
|
|
|
|
|
| A problem exists that prevents the | Original scanning in progress | Job in progress |
Blinking | machine from being used (out of |
| (During original scanning, paper |
| toner, paper misfeed, etc.) |
| feeding, and output) |
|
|
|
|
Off | No problems | Standby | Jobs cannot be accepted |
|
|
|
|
The green indicator has two indicating patterns. The indicating pattern can be changed using "Status Indicator Settings" in the system settings (administrator). The factory default setting is "Pattern 1".
• If solidly lit and blinking states occur simultaneously, the blinking state is given priority.
• When auto power
System Settings (Administrator): Status Indicator Settings
Use this to change the indicator settings of the green status indicator.
17