130 pages of original

have been scanned.

Copy the scanned data?

CancelOK

4

After scanning is finished, check the number of sheets that were scanned and touch the [OK] key.

Copying will begin.

•When job build mode is used, the number of scanned sheets appears when the [Read-End] key is touched.

•The number that is displayed is the number of scanned original sheets, not the number of scanned original pages. For example, when two-sided copying is performed using one original, the number "1" will appear to indicate that one original sheet was scanned, not "2" to indicate the front-side page and the reverse side page.

If the displayed number of original sheets is different from the actual number of original sheets...

Press the [STOP] key ( ).

To cancel the original count mode setting...

Touch the [Original Count] key in the screen of step 2 so that it is not highlighted.

114