STORING FAX OPERATIONS (Program)

A destination, original settings, and functions can be stored in a program. When you wish to use those settings to send an image, they can be retrieved with ease.

For example, suppose 8-1/2" x 11" (A4) size documents are scanned into a file and sent to each branch office once a month.

(1)The same documents are sent to each branch office

(2)Each page of a bound document is successively transmitted

(3)Smudges on the edges of the documents are erased before transmission

When a job program is not stored

When a job program is stored

 

 

Enter the address of each branch office.

Touch a stored program key.

Select Dual Page Scan.

Press the [START] key ( ).

The originals are scanned and transmitted.

Select Erase settings.

 

Press the [START] key ( ).

 

The originals are scanned and transmitted.

 

 

 

Considerable time is required to send the documents each

When a program is used, settings are selected with ease by

month because the above settings must be selected.

simply pressing the stored key.

In addition, mistakes may occasionally be made when

In addition, transmission takes place based on the stored

selecting the settings, so incorrect transmissions may occur.

settings so there are no chances for mistakes.

•Programs are stored, edited, and deleted using "Address Control" in the system settings. See "ADDRESS CONTROL"

(page 174).

•Programs can also be stored in the Web pages. Click [Job Programs] and then [Image Send] in the Web page menu.

•The settings stored in a program will be retained even after the program is used for transmission. The same settings can be used repeatedly for transmission.

•The following settings can be stored in programs. Scan mode, Internet fax mode

-Destinations

-Image settings: Resolution, Exposure

-Special modes: Erase, Dual Page Scan, Suppress Background, 2in1

Fax mode

-Destinations

-Image setting: Resolution, Exposure

-Special modes: Polling Reception, Erase, Dual Page Scan, 2in1

-F-code communication: A destination that includes an F-code can be stored to perform an F-code operation.

•Up to 48 programs can be stored.

•Up to 500 destinations can be stored in one program. (If a Scan to Network Folder destination is selected, only one destination can be stored.)

•This function cannot be used in USB memory mode or data entry mode.

90