5 TROUBLESHOOTING
This chapter provides solutions to possible copying problems. See the following table of contents to locate the appropriate page for your question or problem.
PROBLEMS RELATED TO COPYING OPERATION
• Copying does not take place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
• Image rotation does not take place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
•
•The paper size of a tray cannot be set.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
PROBLEMS RELATED TO COPY RESULTS
• The image is too light or too dark.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
• Part of the image is cut off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
•Copies come out blank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
•System settings
Descriptions of system settings similar to the following example appear in this chapter.
Example:
➞ System Settings (Administrator) > "Copy Settings" > "Other Settings" > "Rotation Copy Setting" > 
This is an abbreviated description of the procedure for selecting the setting. ">" indicates the setting sequence and
indicates the state of the setting after it has been enabled. Use these descriptions as a quick manual to help you configure the settings. (For detailed explanations of the system settings (Administrator), see the Administrator's
Guide.)
•For problems common to all functions of the machine and peripheral devices, see the User's Guide.
•If you are unable to solve a problem using the solutions in this chapter, switch off the [POWER] key (
) and the main power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key (
) in that order.
*Do not turn off the machine's main power switch or remove the power plug while a job is being executed or processed. This may damage the hard drive or cause the data being stored or received to be lost.
•If you are unable to solve a problem using the information in this chapter, please contact your dealer or nearest SHARP Service Department.
132