Loading paper

Follow the steps below to load paper in the inserter.

 

Adjust the guide to the size of the paper

 

you are loading.

1

Squeeze the guide lock lever to adjust the guide. When you

have finished moving the guide, release the lever.

 

 

When loading paper larger than 8-1/2" x 11"R or A4, be sure to

 

pull the tray extension all the way out. If the extension is not

 

pulled all the way out, the size of the loaded paper will not be

 

detected correctly.

 

Insert the paper along the guide as far as

 

it will go into the feeder.

 

Up to 200 sheets each can be loaded on the upper tray and the

 

lower tray.

 

The paper size is automatically detected. If the paper size is not

2

detected or you are using a special paper size, or if you need to

change the paper type, change the paper settings in "PAPER

 

TRAY SETTINGS" (page 77) in the system settings.

When loading paper, make sure that the guide is correctly adjusted to the width of the paper.

If there is a gap between the paper and the guide, or if the paper is bowed because the guide is adjusted to a narrower width than the paper, a misfeed, skewed paper feeding, or creases in the paper may result.

63