Turn the card over so that the back is face down, and press the [START] key ( ) to scan the back of the card.

The back of the card will be scanned using the same color mode as the front.

6

Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.

To cancel scanning...

Press the [STOP] key ( ) to cancel the operation.

Touch the [Read-End] key.

Place next original.

(Pg.No.x)

Press [Start].

 

When finished, press [Read-End].

7

Configure

Read-End

 

If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size.

• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.

• Fax mode:

This function cannot be used in direct transmission mode or when the speaker is used to dial.

To cancel Card Shot...

Touch the [Cancel] key in the screen of step 4.

104