Sharp MX-M1100, MX-M850, MX-M950 manual 377

DIRECT TRANSMISSION MODE

If you wish to send a fax ahead of other previously reserved fax transmissions, use direct transmission mode. The original is transmitted directly to the receiving fax machine without being scanned into memory. When direct transmission mode is used, transmission will begin as soon as the transmission in progress is completed (ahead of any previously reserved transmissions).

When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation ( ), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually.

•Image rotation

8-1/2" x 11" and 5-1/2"x8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in

18-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5) originals cannot be rotated for transmission.

Transmission

•Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission.

System Settings (Administrator): Rotation Sending Setting

This is used to select whether or not a scanned original image is rotated before transmission.

The factory default setting is: rotate 8-1/2" x 11" to 8-1/2" x 11"R, and 5-1/2" x 8-1/2"R to 5-1/2" x 8-1/2" (A4 to A4R, B5R to B5, and A5R to A5).

(3)

(2)

5

10

15

To

Cc

Condition

Settings

AAA AAA

BBB BBB

1

Address Review

2

CCC CCC

DDD DDD

Address Entry

EEE EEE

FFF FFF

Global

Address Search

GGG GGG

HHH HHH

Sub Address

III III

JJJ JJJ

2

Frequent Use

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

Sort Address

Auto Reception

Fax Memory:100%

Enter the destination fax number.

(1)Touch the [Address Book] key in the base screen.

(2)Touch the one-touch key of the desired destination. The icon appears in one-touch keys that contain fax numbers.

(3)Touch the [Condition Settings] key.

•Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot be used.

•There is no need to touch the [To] key.

•If the network scanner expansion kit and Internet fax expansion kit are not installed, the [To] key and [Cc] key will not appear.

•In addition to specification by a one-touch key, a destination can also be specified by a search number. You can also manually enter a destination or look up a destination in a global address book. For more information, see "2. ENTERING DESTINATIONS" (page 25).

57