When "Sending data has been completed." appears in the touch panel, disconnect the USB memory.

8

Do not disconnect the USB memory while "Processing data." or "Sending data." appears in the touch panel.

• When transmission to USB memory is completed, "Sending data has been completed." is displayed. After a brief interval the message is cleared and the base screen of image send mode reappears. (The base screen of image send mode is the screen that appears when the [IMAGE SEND] key is touched.)

•If the USB memory becomes full during scanning...

A message will appear and scanning will stop. The scanned data will not be stored. However, if the file format is set to JPEG and the [Specified Pages per File] checkbox is selected, files for which scanning is completed will be stored in USB memory.

•To cancel scanning...

Press the [STOP] key ( ) to cancel the operation.

•To cancel scanning to USB memory...

While scanned data is being stored in the USB memory, the message "Sending data." and the [Cancel] key appear in the touch panel. To cancel the storing operation, touch the [Cancel] key.

•System Settings: USB-Device Check

This is used to check the connection of a USB device to the machine.

•System Settings (Administrator): Scan Settings

This is used to set the default color mode and file format.

•System Settings (Administrator): Disable Scan Function The use of USB memory mode can be prohibited.

46