Specifying the send size of the image

Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced.

• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by numerical values.

The send size cannot be specified when [TIFF-S] is selected for the format in Internet fax mode. (The send size is fixed at 8-1/2" x 11"R (A4R).)

Select the mode and display the image settings screen.

1

(1)

Touch the tab of the mode that you wish to use.

 

(2)

Touch the [Original] key.

IMAGE SETTINGS (page 68)

Scan/Original

 

 

OK

 

Scan Size

100% Send Size

 

Auto

8½x11

Auto

2

 

 

Image Orientation

 

 

 

2-Sided

2-Sided

 

Booklet

Tablet

 

Touch the [Send Size] key.

 

 

 

 

 

(1)

 

 

 

 

(2)

 

 

Specify the send size.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1) Touch the desired send size key.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scan/Original

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2) Touch the [OK] key.

 

 

 

Auto

 

 

8½x11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5½x8½

 

 

8½x11R

 

11x17

 

 

AB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

5½x8½R

 

8½x13(216x330)

 

8½x1325(216x340)

 

 

Inch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8½x11

 

 

8½x14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Depending on the paper size specified for the "Scan Size", it may not be possible to select some sizes for the "Send Size". Size keys that cannot be specified for the "Send Size" are grayed out to prevent selection.

To specify an AB size for the send size, touch the [ABInch] key to highlight the [AB] side and then specify the send size.

74