Agilent Technologies 35670-90066 manual Power-on Test Messages

Internal Test Descriptions	Agilent 35670A
Power-on Test Description

Power-on Test Messages

Assembly/Sub-block

Hexadecimal	Message
Code
Undefined	Initial power-on	X	X	X
FF*	CPU flashes LEDs	0	X	X	X
04	LED DSACK failure	0	X	X	X
13	CPU failure	0	X	X	X
01	Coprocessor DSACK failure	0	0	X	X
17	Coprocessor failure	0	0	X	X
18	Boot ROM checksum failure	0	0	0	X
06	Display DSACK failure	0	0	0	0	X
10	Display failure	0	0	0	0	X
1B	Main RAM too small	0	0	0	0	0	X
02	Main RAM DSACK	0	0	0	0	0	X
14	Main RAM bit failure	0	0	0	0	0	X
16	Main RAM refresh failure	0	0	0	0	0	X
1C	Program ROM checksum error	0	0	0	0	0	X
00	Clear ~4s	0	X	X	0	0
A1	Starting DSP test	0	0	X	0	0	0
A2	Fast bus test	0	0	0	0	0	0	X
A0	MFP test failure	0	0	X	0	0
AE	Front panel test	0	0	X	0	0	0	0	X

0Assembly or sub-block is used but is probably not the cause of the failure message. X Assembly or sub-block is probably the cause of the failure message.

(blank) Assembly or sub-block is not used in the test.

FF* If the area of failure is unclear, all LEDs flash continuously.

10-4