Preparing the Analyzer for Use

This chapter contains instructions for inspecting and installing the Agilent 35670A Dynamic Signal Analyzer. This chapter also includes instructions for cleaning the screen, transporting and storing the analyzer.

DC Power Requirements

The analyzer can operate from a dc power source supplying a true range of 10.8 to 30.8 Vdc. With all options installed, power consumption is less than

200 VA. The following table shows typical current requirements at different operating voltages for the standard two-channel analyzer and for the optional four-channel analyzer.

Operating

 

Typical Current

 

 

 

Voltage

Standard 2 channel

Optional 4 channel Agilent 35670A

 

Agilent 35670A

 

 

 

 

 

 

 

 

12 Vdc

8.0 amps

11.0 amps

 

 

 

24 Vdc

4.0 amps

5.5 amps

AC Power Requirements

The analyzer can operate from a 47 to 440 Hz, single-phase, ac power source supplying 90 to 264 Vrms. With all options installed, power consumption is less than 350 VA.

Warning

Only a qualified service person, aware of the hazards involved, should measure

 

the line voltage.

 

 

2-2

Page 40
Image 40
Agilent Technologies 35670-90066 manual DC Power Requirements, AC Power Requirements, Line voltage, Agilent 35670A