Agilent 35670A

Preparing the Analyzer for Use

 

To connect the analyzer to a serial device

To connect the analyzer to a serial device

The Serial Port is a 9-pin, EIA-574 port that is only available using option 1C2, Instrument Basic. The total allowable transmission path length is 50 feet.

Connect the analyzer’s rear panel SERIAL PORT to a serial device using a 9-pin female to 25-pin RS-232-C cable.

Part Number

Cable Description

 

 

HP 24542G

9-pin female to 25-pin male RS-232

 

 

HP 24542H

9-pin female to 25-pin female RS-232

For additional information, see chapter 9 in the Agilent 35670A Service Guide.

To connect the analyzer to a parallel device

The Parallel Port is a 25-pin, Centronics port. The Parallel Port can interface with PCL printers or HP-GL plotters.

Connect the analyzer’s rear panel PARALLEL PORT connector to a plotter or printer using a Centronics interface cable.

Part Number

Cable Description

 

 

HP 92284A

25-pin male to 36-pin male 2-meter Centronics

 

 

HP C2912B

25-pin male to 36-pin male 3-meter Centronics

For additional information, see chapter 9 in the Agilent 35670A Service Guide.

2-11

Page 49
Image 49
Agilent Technologies 35670-90066 To connect the analyzer to a serial device, To connect the analyzer to a parallel device