Default Exposure Settings
Default exposure settings for document filing can be configured. Select [Auto] or [Manual]. If you select [Manual], set the exposure to one of 5 levels.
Default Original Image Type
Select the original type beforehand to enable scanning at a resolution suitable for the original.
The settings are shown below.
•Text/Printed Photo
•Text/Photo
•Text
•Printed Photo*
•Photo*
•Map*
*Does not appear when the exposure is set to [Auto].
Moiré Reduction
This reduces the moiré effect (line pattern) that occurs when printed matter is scanned.
Initial Resolution Settings
One of the following resolutions can be selected for the default resolution for Scan to HDD.
•100X100 dpi
•200X200 dpi
•300X300 dpi
•400X400 dpi
•600X600 dpi
Color Data Compression Ratio Setting
(When the color expansion kit is installed.)
[Low], [Medium], or [High] can be selected for the default compression ratio for color files stored by Scan to HDD.
Scan Complete Sound Setting
This setting adjusts the volume of the beep that sounds when scanning ends. The beep can also be turned off.
Default Output Tray
(When a saddle stitch finisher or finisher is installed.)
"Top Tray" or "Offset Tray" can be selected for the default output tray for printing files saved using Scan to HDD.
Disable Stamp for Reprinting
When a stored file is retrieved and printed, this setting prohibits the selection of a "Stamp" setting in the special modes. If a stamp setting is already selected, it will not be possible to change the stamp setting.
This function can be used to prevent inconsistencies in the printed information, such as that of the original date in the file and the date the file is retrieved and printed.
Batch Print Settings
When printing files by batch printing, this setting is used to prohibit the selection of the [All Users] key and the [User Unknown] key in the user selection screen.
63