Image Send Settings

Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings.

Fax Settings

 

 

 

Fax Default Settings

Pause Time Setting

 

 

 

The fax settings can be enabled or disabled to suit the needs of your workplace.

Fax Own Name and Number Set

Use this setting to enter the fax number of the machine and the name of the user. The entered name and number are printed at the top of each fax page you send.

Sender Name

Enter the sender name. A maximum of 20 characters can be entered for the sender name.

Fax No.

This is used to set the sender fax number.

To insert a pause between digits of the number, touch the [Pause] key.

To insert a space between digits of the number, touch the [Space] key.

Dial Mode Setting

Select the appropriate setting for your telephone line type.

Dial Mode Setting

Select the line type from the list.

Auto Select

Select this after the line has been connected to have the machine automatically detect whether your line is a pulse dial line or a tone dial line.

Auto Wake Up Print

When the [POWER] key ( ) is "off" (but the main power switch is "on") and a fax is received, this function automatically activates the machine and prints the fax. When this function is disabled, received faxes are not printed until the [POWER] key ( ) is switched "on".

Use this to change the length of pauses inserted in fax numbers.

The pause can be changed to any number of seconds from 1 to 15.

Fax Dest. Confirmation Mode

This setting specifies whether or not a destination verification message is displayed when sending a fax in order to prevent accidental transmission to the wrong destination.

Speaker Settings

Use these settings to set the sound heard from the speaker for the Speaker, Ringer Volume, Line Monitor, Fax Receive Complete Signal, Fax Send Complete Signal, and Fax Communication Error Signal. For the Fax Receive Complete Signal, the Fax Send Complete Signal, and the Fax Communication Error Signal, the Tone Pattern and Transmission Complete Sound Time Setting can be selected in addition to the volume.

Check on Setup Sounds

Use this to check the selected tone pattern and volume.

Speaker Volume Details Setting

This enables fine adjustment of the volume levels in the "Speaker Settings". Set volume levels for "Small", "Middle", and "Big".

Remote Reception Number Setting

Fax reception can be activated from an extension phone connected to the machine by entering a 1-digit number

and pressing the key twice on the phone's keypad. This number is called the remote reception number, and you can set it to any number from "0" to "9".

78