Fax Send Settings
Settings for fax transmission can be configured.
Auto Reduction Sending Setting
This setting is used to have the size of transmitted faxes automatically reduced to match the size of the paper in the receiving machine.
If the setting is disabled, faxes are sent at full size. Because the size is not adjusted to match the size of the printing paper, part of the received fax may be cut off.
Date/Own Number Print Position Setting
This setting determines the position of the date and sender information printed at the top of faxes by the receiving machine. To add the information at the top of the page outside the scanned image, select [Outside the Original Image]. To add the information inside the scanned image, select [Inside the Original Image].
For more information on the print position, see "ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)" in the Image Send Guide.
Rotation Sending Setting
When transmitting an image that is one of the following sizes, this function rotates the image counterclockwise 90 degrees. (The setting can be configured separately for each size.)
Quick On Line Sending
When this setting is enabled, the machine starts transmitting a fax as soon as the first page is scanned. Transmission takes place at the same time as the remaining pages are being scanned.
If you disable this setting, transmission will not begin until all pages have been scanned. Note that this setting does not apply to manual transmission.
Printing Page Number at Receiver
This setting is used to add the page number to the top of each fax page printed by the receiving machine.
Recall in Case of Line Busy
This program is used to set the number of recall attempts and the interval between recall attempts when a transmission is not successful due to the line being busy or other reason.
Times:
This setting specifies whether or not recalling is performed when the line is busy. When recalling is performed, you can set the number of recall attempts. Any number from 1 to 14 can be selected.
Interval:
The interval between recall attempts can be set. Any number of minutes from 1 to 15 can be selected.
Even when this setting is enabled, note that your machine will not
Recall in Case of Communication Error
This determines how many times your machine will automatically
Times:
Specify how many times the machine will
Interval:
The interval between recall attempts can be set. Any number of minutes from 1 to 15 can be selected.
Even when this setting is enabled, note that your machine will not
80