Siemens 6RA70 specifications Operating Instructions

Fault	Description
No.	Cause as a function of fault value	Further information (r047.002 to r047.016)
	(r047.001, r949.001 or r949.009 with acknowledged error)

Fault value:

1Time credit for S00 = 0 hrs

The technology option S00 for 500 operating hours no longer applies. The functions are now no longer available, but the parameter settings have been retained.

If you wish to continue using technology option S00, please contact your nearest Siemens Sales Office to obtain the PIN number you will require to permanently enable this option.

You will need to know the serial number of your SIMOREG DC Master. For further details, please refer to the description of parameters U977 and n978 in Chapter 11 of the Parameter List.

2Time credit S00 < 100 Std.

The remaining time period of temporary enabling of technology option S00 is now less than 100 operating hours. The technology functions will not be available for much longer.

If you wish to continue using technology option S00, please contact your nearest Siemens Sales Office to obtain the PIN number you will require to permanently enable this option.

for permanent enabling of technology option S00.

You will need to know the serial number of your SIMOREG DC Master. For further details, please refer to the description of parameters U977 and n978 in Chapter 11 of the Parameter List.

3S00 operation will not be possible if an SLB cycle time of < 1 ms is set

Owing to the available capacity of the electronics board, it is not possible to operate the S00 technology option at the same time as a SIMOLINK bus with an extremely short cycle time (U746 < 1 ms).

See also parameter U746.

Siemens Energy & Automation	9-21
SIMOREG DC Master Base Drive Panel	Operating Instructions