Siemens 6RA70 specifications Analog outputs, 10-75

	PNU	Description	Value range	No. indices	See
			[Unit]	Factory	Change
			Steps	setting	(Access /
				Type	Status)
	P746	Source for enabling of "Main actual value" analog input	All binector numbers	Ind: None	P052 = 3
*		Selection of binector to control enabling of the analog input ("1" state =	1	FS=1	P051 = 40
				Type: L2	Offline
	(G113)	enabled)
		0 = binector B0000
		1 = binector B0001
		etc.

10.38 Analog outputs

(see also Section 8, Sheets G115 and G116 of Operating Instructions 6RX1700-0AD**)

Analog output terminals 12 / 13 (actual current display)

P749	Control word for terminal 12 (actual current display)		0 to 3	Ind: None	P052 = 3
*	0	Output with correct sign	1	FS=0	P051 = 40
				Type: O2	Online
(G115)		(positive voltage: Current in torque direction MI)
		(negative voltage: Current in torque direction MII)
	1	Output of absolute value (positive voltage only)
	2	Output with sign, inverted
		(positive voltage: Current in torque direction MII)
		(negative voltage: Current in torque direction MI)
	3	Output of absolute value, inverted (negative voltage only)

Analog output terminals 14 / 15

P750	Source for output value at analog output 1
*	Selection of connector whose value is to applied to the analog output
(G115)	0 = connector K0000
	1 = connector K0001
	etc.

P751	Mode of signal injection at analog output 1
*	0 =	Injection of signal with correct sign
(G115)	1 =	Injection of absolute value of signal
	2 =	Injection of signal with sign, inverted
	3 =	Injection of absolute value of signal, inverted
P752	Filtering time for analog output 1
(G115)
P753	Normalization of analog output 1
(G115)	y [V ] = x ∗		P753
			100 %
	x = Normalization input (corresponds to filtering output)
	y = Normalization output (corresponds to output voltage at analog output
	with offset = 0)
P754	Offset for analog output 1
(G115)

All connector numbers

1

0 to 3

1

0 to 10000 [ms] 1ms

-200.00 to 199.99 [V]

0.01V

-10.00 to 10.00 [V]

0.01V

Ind: None	P052	= 3
FS=0	P051	= 40
Type: L2	Online
Ind: None	P052	= 3
FS=0	P051	= 40
Type: O2	Online
Ind: None	P052	= 3
FS=0	P051	= 40
Type: O2	Online
Ind: None	P052	= 3
FS=10.00	P051	= 40
Type: I2	Online
Ind: None	P052	= 3
FS=0.00	P051	= 40
Type: I2	Online

Analog output terminals 16 / 17

P755	Source for output value at analog output 2
*	Selection of connector whose value is to applied to the analog output
(G115)	0 = connector K0000
	1 = connector K0001
	etc.

P756	Mode of signal injection at analog output 2
*	0 =	Injection of signal with correct sign
(G115)	1 =	Injection of absolute value of signal
	2 =	Injection of signal with sign, inverted
	3 =	Injection of absolute value of signal, inverted
P757	Filtering time for analog output 2
(G115)

All connector numbers

1

0 to 3

1

0 to 10000 [ms] 1ms

Ind: None	P052	= 3
FS=0	P051	= 40
Type: L2	Online
Ind: None	P052	= 3
FS=0	P051	= 40
Type: O2	Online
Ind: None	P052	= 3
FS=0	P051	= 40
Type: O2	Online

SIEMENS Energy & Automation	10-75
SIMOREG DC Master Base Drive Panel Operating Instructions