Siemens 6RA70 specifications Configuring of closed-loop control, 10-59

PNU

Description

Value range [Unit] Steps

No. indices Factory setting Type

See Change (Access / Status)

P592	Source for actual value of "n < ncomp. signal”
*	n < ncomp. signal:
(G187)	Selection of connector to be injected as input quantity (n) for the n < ncomp.
	signal.
	0 = connector K0000
	1 = connector K0001
	etc.
P593	Source for actual value of “n < nmin signal”
*	n < nmin signal:
(G187)	Selection of connector to be injected as input quantity (n) for the n < nmin
	signal.
	0 = connector K0000
	1 = connector K0001
	etc.
P594	Source for input quantity of "Polarity signal”
*	Polarity signal of speed setpoint:
(G188)	Selection of connector to be injected as input quantity "nset" for the polarity
	signal of the speed setpoint.
	0 = connector K0000
	1 = connector K0001
	etc.
P595	Source for actual value of "Overspeed signal”
*	Overspeed signal:
(G188)	Selection of connector to be injected as input quantity "nact" for the
	overspeed signal.
	0 = connector K0000
	1 = connector K0001
	etc.
P596	Source for setpoint of "nset = nact signal 2”	[SW 1.9 and later]
*	Setpoint/actual value deviation signal:
(G187)	Selection of connector to be injected as input quantity "nset" for the
	setpoint/actual value deviation signal.
	0 = connector K0000
	1 = connector K0001
	etc.
P597	Source for actual value of “nset = nact signal 2”	[SW 1.9 and later]
*	Setpoint/actual value deviation signal:
(G187)	Selection of connector to be injected as input quantity "nact" for the
	setpoint/actual value deviation signal.
	0 = connector K0000
	1 = connector K0001
	etc.

All connector numbers

1

All connector numbers

1

All connector numbers

1

All connector numbers

1

All connector numbers

1

All connector numbers

1

Ind: None	P052	= 3
FS=167	P051	= 40
Type: L2	Offline

Ind: None	P052	= 3
FS=167	P051	= 40
Type: L2	Offline

Ind: None	P052	= 3
FS=170	P051	= 40
Type: L2	Offline

Ind: None	P052	= 3
FS=167	P051	= 40
Type: L2	Offline

Ind: None	P052	= 3
FS=174	P051	= 40
Type: L2	off-line

Ind: None	P052	= 3
FS=167	P051	= 40
Type: L2	off-line

10.34 Configuring of closed-loop control

Setting values for configuring of torque shell

P600	Source for gating unit input (armature)	All connector	Ind: 4	P052 = 3
*	i001 to i004:	numbers	FS=	P051 = 40
		1	i001: 102	off-line
(G163)	Selects which connectors are applied as the gating unit input
			i002: 0
	(armature). All four values are added.		i003: 0
	Settings:		i004: 0
	0 = connector K0000		Typ: L2
	1 = connector K0001
	etc.

SIEMENS Energy & Automation	10-59
SIMOREG DC Master Base Drive Panel Operating Instructions