Siemens 6RA70 specifications 10-68

PNU	Description	Value range	No. indices	See
		[Unit]	Factory	Change
		Steps	setting	(Access /
			Type	Status)
r653	Display of status word 2		Ind: None	P052 = 3
(G183)	Mode of representation on operator panel (PMU):		Type: V2

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Segments 0 to 15 correspond to bits 16 to 31 of the status word

Segment ON:	Corresponding bit is in log. "1" state
Segment OFF:	Corresponding bit is in log. "0" state

The following parameters are used to select the binectors (some of which are gated with one another or with other signals) to be applied to the individual bits of the control word.

The settings of all these parameters are as follows:

0 = binector B0000

1 = binector B0001 etc.

The functions and logic operations are also shown on Sheets G180 and G181 in Section 8 of Operating Instructions 6RX1700-0AD**.

Control word 1

P654	Source for control word 1, bit0				All binector numbers	Ind: 2	P052	= 3
*	(0=OFF1, 1=ON; ANDed with terminal 37)				1	FS=1	P051	= 40
BDS						Type: L2	Offline
(G130)
P655	1st source for control word 1, bit1				All binector numbers	Ind: 2	P052	= 3
*	(0=OFF2; ANDed with 2nd and 3rd sources for bit1)				1	FS=1	P051	= 40
						Type: L2	Offline
BDS
(G180)
P656	2nd source for control word 1, bit1				All binector numbers	Ind: 2	P052	= 3
*	(0=OFF2; ANDed with 1st and 3rd sources for bit1)				1	FS=1	P051	= 40
						Type: L2	Offline
BDS
(G180)
P657	3rd source for control word 1, bit1				All binector numbers	Ind: 2	P052	= 3
*	(0=OFF2; ANDed with 1st and 2nd sources for bit1)				1	FS=1	P051	= 40
						Type: L2	Offline
BDS
(G180)
P658	1st source for control word 1, bit2				All binector numbers	Ind: 2	P052	= 3
*	(0=OFF3=Fast stop; ANDed with 2nd and 3rd sources for bit2)				1	FS=1	P051	= 40
						Type: L2	Offline
BDS
(G180)
P659	2nd source for control word 1, bit2				All binector numbers	Ind: 2	P052	= 3
*	(0=OFF3=Fast stop; ANDed with 1st and 3rd sources for bit2)				1	FS=1	P051	= 40
						Type: L2	Offline
BDS
(G180)
P660	3rd source for control word 1, bit2				All binector numbers	Ind: 2	P052	= 3
*	(0=OFF3=Fast stop; ANDed with 1st and 2nd sources for bit2)				1	FS=1	P051	= 40
						Type: L2	Offline
BDS
(G180)
P661	Source for control word 1, bit3				All binector numbers	Ind: 2	P052	= 3
*	(0=pulse disable, 1=enable; ANDed with terminal 38)				1	FS=1	P051	= 40
BDS						Type: L2	Offline
(G180)
P662	Source for control word 1, bit4				All binector numbers	Ind: 2	P052	= 3
*	(0=set ramp-function generator to zero, 1=enable ramp-function generator)				1	FS=1	P051	= 40
BDS						Type: L2	Offline
(G180)
P663	Source for control word 1, bit5				All binector numbers	Ind: 2	P052	= 3
*	(0=ramp-function generator stop, 1=ramp-function generator start)				1	FS=1	P051	= 40
BDS						Type: L2	Offline
(G180)
P664	Source for control word 1, bit6				All binector numbers	Ind: 2	P052	= 3
*	(0=enable setpoint, 1=disable setpoint)				1	FS=1	P051	= 40
BDS						Type: L2	Offline
(G180)
P665	1st source for control word 1, bit7				All binector numbers	Ind: 2	P052	= 3
*	(0→1 transition=acknowledge; ORed with 2	nd	rd	sources for bit7)	1	FS=0	P051	= 40
BDS			and 3			Type: L2	Offline
(G180)
10-68					SIEMENS Energy & Automation
				SIMOREG DC Master Base Drive Panel Operating Instructions