Siemens 6RA70 specifications Settable fixed values, 10-45

PNU Description

Field current monitoring

Value range [Unit] Steps

No. indices	See
Factory	Change
setting	(Access /
Type	Status)

Fault message F005 is activated if the actual field current (K0265) is lower than the percentage of the field current setpoint (K0268) set in P396 for longer than the time set in parameter P397.

Note:

Fault message F005 is only activated, however, if the field current setpoint is > 2% of the converter rated DC current of the field (r073.i02) ist.

P396	Threshold for field current monitoring	[SW 1.9 and later]	1 to 100	Ind: 4	P052	= 3
			[%]	FS=50	P051	= 40
FDS			0.01% of setpoint at	Type: O2	on-line
(G167)			field current con-
			troller input (K0268)
P397	Field current monitoring time	[SW 1.9 and later]	0.02 to 60.00	Ind: 4	P052	= 3
FDS			[s]	FS=0.50	P051	= 40
(G167)			0.01s	Type: O2	on-line
If < If x signal
P398	Field current threshold If x		0.00 to 199.99	Ind: 4	P052	= 3
	Setpoint-oriented field current threshold for If < If x limit-value monitor.		[%]	FS=80.00	P051	= 40
FDS			0.01% of setpoint at	Type: O2	Online
	Note:		field current
(G188)			controller input
	This threshold affects the sequence of control operations for the "Direction
			(K0268)
	of rotation reversal using field reversal" and "Braking with field reversal"
	functions (see Section 9).
	The If < If x signal is connected to binector B0216, the actual value at field
	current controller input K0265 is applied as If.
	B0216 = 0 when K0265 > threshold set in P398
	B0216 = 1 when K0265 < threshold set in P398 + hysteresis set in P399
	0 → 1 transition takes place when K0265 < P398
	1 → 0 transition takes place when K0265 > P398 + P399
			0.00 to 100.00
P399	Hysteresis for If < If x signal			Ind: 4	P052	= 3
	This value is added to the response threshold if If < If x	is active.	[%]	FS=1.00	P051	= 40
FDS			0.01% of converter	Type: O2	Online
	(see also P398)		rated field DC
(G188)			current (r073.i02)
10.19 Settable fixed values
Function:	The value set in the parameter is applied to the specified connector
P401	K401 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0401		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P402	K402 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0402		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P403	K403 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0403		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P404	K404 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0404		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P405	K405 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0405		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P406	K406 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0406		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P407	K407 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0407		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P408	K408 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0408		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P409	K409 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0409		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
P410	K410 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0410		[%]	FS=0.00	P051	= 40
(G120)			0.01%	Type: I2	Online
SIEMENS Energy & Automation					10-45
SIMOREG DC Master Base Drive Panel Operating Instructions