Siemens 6RA70 specifications Operating Instructions

5. Manual shifting

If the 5 existing digits on the 7-segment display are not sufficient to display a parameter value, the display first shows just 5 digits (see Fig. 8.1). To indicate that more digits are concealed to the right or left of this “window”, the right-hand or left-hand digit flashes. By pressing the <P>+<Down> or <P>+<Up> key, you can shift the window over the remaining digits of the parameter value. As an orientation guide, the position of the right-hand digit within the overall parameter value is displayed briefly during manual shifting.

Example:Parameter value “208.173“
"208.17" is displayed when the parameter is selected. When the
P and LOWER keys are pressed, "1" appears briefly followed by
“08.173“, i.e. the right-hand digit 3 is the 1st position in the	P
parameter value.	+
When the P and RAISE keys are pressed, "2" appears briefly	P
followed by “208.17“, i.e. the right-hand digit 7 is the 2nd position	+
in the parameter value.
Fig. 8.1 Shifting the PMU display for parameter values with more than 4 digits

6. Press the P key to return to the parameter number level from the parameter value level.

Siemens Energy & Automation	8-5
SIMOREG DC Master Base Drive Panel	Operating Instructions