Siemens 6RA70 specifications Fixed control bits, 10-46

PNU	Description		Value range	No. indices	See
			[Unit]	Factory	Change
			Steps	setting	(Access /
				Type	Status)
P411	K411 fixed value		-199.99 to 199.99	Ind: 4	P052	= 3
FDS	is applied to connector K0411	[%]		FS=0.00	P051	= 40
(G120)		0.01%		Type: I2	Online
P412	K412 fixed value		-32768 to 32767	Ind: 4	P052	= 3
FDS	is applied to connector K0412	1		FS=0	P051	= 40
(G120)				Type: I2	Online
P413	K413 fixed value		-32768 to 32767	Ind: 4	P052	= 3
FDS	is applied to connector K0413	1		FS=0	P051	= 40
(G120)				Type: I2	Online
P414	K414 fixed value		-32768 to 32767	Ind: 4	P052	= 3
FDS	is applied to connector K0414	1		FS=0	P051	= 40
(G120)				Type: I2	Online
P415	K415 fixed value		-32768 to 32767	Ind: 4	P052	= 3
FDS	is applied to connector K0415	1		FS=0	P051	= 40
(G120)				Type: I2	Online
P416	K416 fixed value		-32768 to 32767	Ind: 4	P052	= 3
FDS	is applied to connector K0416	1		FS=0	P051	= 40
(G120)				Type: I2	Online
10.20 Fixed control bits
Function:	The value set in the parameter is applied to the specified binector
P421	B421 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0421	1		FS=0	P051	= 40
(G120)				Type: O2	Online
P422	B422 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0422	1		FS=0	P051	= 40
(G120)				Type: O2	Online
P423	B423 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0423	1		FS=0	P051	= 40
(G120)				Type: O2	Online
P424	B424 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0424	1		FS=0	P051	= 40
(G120)				Type: O2	Online
P425	B425 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0425	1		FS=0	P051	= 40
(G120)				Type: O2	Online
P426	B426 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0426	1		FS=0	P051	= 40
(G120)				Type: O2	Online
P427	B427 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0427	1		FS=0	P051	= 40
(G120)				Type: O2	Online
P428	B428 fixed bit		0 to 1	Ind: 4	P052	= 3
FDS	is applied to binector B0428	1		FS=0	P051	= 40
(G120)				Type: O2	Online

10.21 Digital setpoint input (fixed setpoint, inching and crawling setpoints)

(see also Section 8, Sheets G127, G129 and G130 of Operating Instructions 6RX1700-0AD**)

Fixed setpoint

Function: Up to 8 connectors can be selected in P431 indices .01 to .08. These can be applied as an additional fixed setpoint (K0204, K0209) via the binectors selected in P430, indices .01 to .08 (setpoint is applied when binector switches to log. "1" state). P432 indices .01 to .08 can be set to define for each setpoint individually whether the ramp-function generator must be bypassed on setpoint injection.

If fixed setpoint injection is not selected, the connector set in P433 is applied to K0209.

P430

*

(G127)

Source for fixed-setpoint injection

Selection of binector to control injection of the fixed setpoint ("1" state = fixed setpoint injected).

0 = binector B0000

1 = binector B0001 etc.

All binector numbers 1

Ind: 8

FS=0

Type: L2

P052 = 3

P051 = 40 Offline

10-46	SIEMENS Energy & Automation
	SIMOREG DC Master Base Drive Panel Operating Instructions