Siemens 6RA70 Device identification, Visualization parameters Control and status word, 10-91

PNU

Description

Value range [Unit] Steps

No. indices Factory setting Type

See Change (Access / Status)

r959	Alarm parameter 7
	Parameter alarms 7 (TB alarms 1)
	If one of the alarms between 97 and 112 is generated, the corresponding
	segment in the display lights up.
	112	111	110	109	108	107	106	105
	104	103	102	101	100	99	98	97

r960	Alarm parameter 8
	Parameter alarms 8 (TB alarms 2)
	If one of the alarms between 113 and 128 is generated, the corresponding
	segment in the display lights up.
	128	127	126	125	124	123	122	121
	120	119	118	117	116	115	114	113

Ind: None	P052 = 3
Type: V2

Ind: None	P052 = 3
Type: V2

10.48 Device identification

r964 Parameters for device identification on the PROFIBUS

[SW 2.0 and later]

Display parameters to support overview and diagnosis of all nodes on the PROFIBUS-DP during and after commissioning

(coding according to PROFIBUS profile V3)

i001: Display of the manufacturer of the SIMOREG DC Master 6RA70 : SIEMENS = 42

i002: Display of device type: SIMOREG DC Master 6RA70 = 4110

i003: Display of the software version of the SIMOREG DC Master 6RA70

(see r060.001)

i004: Display of year of generation of the software of the SIMOREG DC Master 6RA70: y y y y

(see r061.001)

i005: Display of the month and day of generation of the software of the SIMOREG DC Master 6RA70: d d m m

(see r061.003 and r061.002)

i006: Display of the controlled axes of the SIMOREG DC Master 6RA70: 1

0 to 65535

1

Ind: 6

Type: O2

P052 = 1

10.49 Visualization parameters: Control and status word

r967	Display of control word 1
	Visualization parameter for control word 1 (bits 0-15)
	Identical to r650 (control word 1)
r968	Display of status word 1
	Visualization parameter for status word 1 (bits 0 - 15)
	Identical to r652 (status word 1)

Ind: None	P052 = 3
Type: V2
Ind: None	P052 = 3
Type: V2

10.50 Resetting and storing parameters,

list of existing and modified P and r parameters

P970 Restore factory setting

*

Reset parameters to factory setting (default)

0:Parameter reset: All parameters are reset to their original values (factory setting). This parameter is then automatically reset to 1.

1:No parameter reset

Note: Function can also be selected by setting P051=21.

0 to 1

1

Ind: None

FS=1

Type: O2

P052 = 3

P051 = 40 Offline

SIEMENS Energy & Automation	10-91
SIMOREG DC Master Base Drive Panel Operating Instructions