Siemens 6RA70 specifications 10-86, R815 Transmit data on G-SST3

PNU		Description		Value range	No. indices	See
				[Unit]	Factory	Change
				Steps	setting	(Access /
					Type	Status)
r814		Receive data on G-SST3			Ind: 20	P052 = 3
		When USS protocol (P800=2) is selected:			Type: L2
(G172)
		Display of data received via USS interface 3
(G174)
		i001:	Display process data word 1
	...
		i016 Display process data word 16
		i017:	Display parameter data word 1
	...
		i020:	Display parameter data word 4
		When peer-to-peer (P800=5) is selected:
		Display of data received via peer-to-peer interface 3
		i001:	Receive data word 1
	...
		i005 Receive data word 5
		i006:	Not used
	...
		i020	Not used
r815		Transmit data on G-SST3			Ind: 20	P052 = 3
		When USS protocol (P800=2) is selected:			Type: L2
(G172)
		Display of the data to be transmitted via USS interface 3
(G174)
		i001:	Display process data word 1
	...
		i016 Display process data word 16
		i017:	Display parameter data word 1
	...
		i020:	Display parameter data word 4

When peer-to-peer (P800=5) is selected:

Display of the data to be transmitted via peer-to-peer interface 3

i001: Transmit data word 1

...

i005 Transmit data word 5 i006: Not used

...

i020 Not used

Peer-to-peer interfaces: Enable transmission and receipt of telegrams:

If transmission on a peer-to-peer interface is disabled, the associated output drivers are connected to high impedance. If reception is
disabled on a peer-to-peer interface, then the telegram failure monitoring function is deactivated.
P816	Peer-to-peer 2: Source for data reception enabling command	All binector numbers	Ind: None	P052	= 3
	0 = binector B0000	1	FS=1	P051	= 40
(G173)			Type: L2	Offline
	1 = binector B0001
	etc.
P817	Peer-to-peer 2: Source for data transmission enabling command	All binector numbers	Ind: None	P052	= 3
	0 = binector B0000	1	FS=1	P051	= 40
			Type: L2	Offline
(G173)	1 = binector B0001
	etc.
P818	Peer-to-peer 3: Source for data reception enabling command	All binector numbers	Ind: None	P052	= 3
	0 = binector B0000	1	FS=1	P051	= 40
(G174)			Type: L2	Offline
	1 = binector B0001
	etc.
P819	Peer-to-peer 3: Source for data transmission enabling command	All binector numbers	Ind: None	P052	= 3
	0 = binector B0000	1	FS=1	P051	= 40
(G174)			Type: L2	Offline
	1 = binector B0001
	etc.

10-86	SIEMENS Energy & Automation
	SIMOREG DC Master Base Drive Panel Operating Instructions