Siemens 6RA70 specifications 10-44

	PNU	Description		Value range	No. indices	See
				[Unit]	Factory	Change
				Steps	setting	(Access /
					Type	Status)
	P373	Speed threshold ncomp.		0.00 to 199.99	Ind: 4	P052	= 3
		Speed threshold for n < ncomp. signal		[%]	FS=100.00	P051	= 40
	FDS			0.01% of maximum	Type: O2	Online
	(G187)			speed
	P374	Hysteresis for < ncomp. signal (n < ncomp. signal)		0.00 to 199.99	Ind: 4	P052	= 3
		This value is added to the response threshold if n < ncomp. is active.		[%]	FS=3.00	P051	= 40
	FDS			0.01% of maximum	Type: O2	Online
	(G187)			speed
	P375	OFF delay for n < ncomp. signal		0.0 to 100.0	Ind: 4	P052	= 3
	FDS			[s]	FS=3.0	P051	= 40
	(G187)			0.1s	Type: O2	Online
	Setpoint/actual value deviation 2
				0.00 to 199.99
	P376	Permissible setpoint/actual value deviation 2	[SW 1.9 and later]		Ind: 4	P052	= 3
				[%]	FD=3.00	P051	= 40
	FDS			0.01% of maximum	Type: O2	on-line
	(G187)			speed
	P377	Hysteresis for setpoint/actual value deviation 2 signal		0.00 to 199.99	Ind: 4	P052	= 3
			[SW 1.9 and later]	[%]	FS=1.00	P051	= 40
	FDS	This value is added to the response threshold if a setpoint/actual value		0.01% of maximum	Type: O2	on-line
	(G187)			speed
		deviation signal is active
	P378	Response delay for setpoint/actual value deviation signal 2		0.0 to 100.0	Ind: 4	P052	= 3
	FDS		[SW 1.9 and later]	[s]	FS=3.0	P051	= 40
	(G187)			0.1s	Type: O2	on-line
	Overspeed
				0.0 to 199.9
	P380	Maximum speed in positive direction of rotation			Ind: 4	P052	= 3
				[%]	FS=120.0	P051	= 40
	FDS			0.1% of maximum	Type: O2	Online
	(G188)			speed
	P381	Maximum speed in negative direction of rotation		-199.9 to 0.0	Ind: 4	P052	= 3
				[%]	FS=-120.0	P051	= 40
	FDS			0.1% of maximum	Type: I2	Online
	(G188)			speed
	Setpoint/actual value deviation 1
				0.00 to 199.99
	P388	Permissible deviation between setpoint and actual value 1			Ind: 4	P052	= 3
				[%]	FS=3.00	P051	= 40
	FDS			0.01% of maximum	Type: O2	Online
	(G187)			speed
	P389	Hysteresis for setpoint/actual value deviation signal 1		0.00 to 199.99	Ind: 4	P052	= 3
		This value is added to the response threshold if a setpoint/actual value		[%]	FS=1.00	P051	= 40
	FDS			0.01% of maximum	Type: O2	Online
		deviation signal is active
	(G187)			speed
	P390	Response delay for setpoint/actual value deviation signal 1		0.0 to 100.0	Ind: 4	P052	= 3
	FDS			[s]	FS=3.0	P051	= 40
	(G187)			0.1s	Type: O2	Online
	If < If min signal
	P394	Field current threshold If min		0.00 to 199.99	Ind: 4	P052	= 3
		Field current threshold for If < If min limit-value monitor.		[%]	FS=3.00	P051	= 40
	FDS			0.01% of converter	Type: O2	Online
		Note:		rated field DC
	(G188)			current (r073.i02)
		This threshold affects the sequence of control operations for the "Direction
		of rotation reversal using field reversal" and "Braking with field reversal"
		functions (see Section 9).
		The If < If min signal is connected to binector B0215, the actual value at
		field current controller input K0265 is applied as If.
		B0215 = 0 when K0265 > threshold set in P394
		B0215 = 1 when K0265 < threshold set in P394 + hysteresis set in P395
		0 → 1 transition takes place when K0265 < P394
		1 → 0 transition takes place when K0265 > P394 + P395
	P395	Hysteresis for If < If min signal		0.00 to 100.00	Ind: 4	P052	= 3
		This value is added to the response threshold if If < If min	is active.	[%]	FS=1.00	P051	= 40
	FDS			0.01% of converter	Type: O2	Online
		(see also P394)		rated field DC
	(G188)			current (r073.i02)
10-44				SIEMENS Energy & Automation
			SIMOREG DC Master Base Drive Panel Operating Instructions