Siemens 6RA70 specifications 10-10

PNU		Description									Value range	No. indices	See
											[Unit]	Factory	Change
											Steps	setting	(Access /
												Type	Status)
r040	Display of limitations:											Ind: None	P052 = 3
		Representation on operator panel (PMU):										Type: V2
			15	14	13	12	11	10	9	8
			7	6	5	4	3	2	1	0
		Segment ON:	Corresponding limitation is reached
		Segment OFF:	Corresponding limitation is not reached

Segment or bit

0αW limit (field) reached (P251)

1Negative current limit (field) reached (K0274)

2αW limit (armature) reached (αW acc. to P151

for continuous current, 165° for discontinuous current)

3....... Negative current limit (armature) reached (K0132)

4....... Negative maximum speed reached (P513)

Speed limiting controller responds (B0201)

5....... Negative torque limit reached (B0203)

6....... Neg. limitation at ramp generator output reached (K0182)

7....... Neg. limitation at ramp generator input reached (K0197)

8....... αG limit (field) reached (P250)

9....... Positive current limit (field) reached (K0273)

10....... αG limit (armature) reached (P150)

11....... Positive current limit (armature) reached (K0131)

12....... Positive maximum speed reached (P512)

Speed limiting controller responds (B0201)

13....... Positive torque limit reached (B0202)

14....... Pos. limitation at ramp generator output reached (K0181)

15....... Pos. limitation at ramp generator input reached (K0196)

Note: This parameter has the same bit assignments as connector K0810.

Connector and binector displays
r041	High-resolution connector display:		-200.00 to 199.99	Ind: 2	P052 = 3
	i001:	Display of connector selected in P042.01	[%]	Type: I2
(G121)			0.01%
	i002:	Display of connector selected in P042.02
	The display value is filtered with a time constant of 300ms (see Section 8,
	Sheet G121)
P042	High-resolution connector display:		All connector	Ind: 2	P052 = 3
*	i001:	Selection of connector to be displayed in r041.01	numbers	FS=0	P051 = 40
			1	Type: L2	Online
(G121)	i002:	Selection of connector to be displayed in r041.02
	The display value is filtered with a time constant of 300ms (see Section 8,
	Sheet G121)
r043	Connector display:		-200.0 to 199.9	Ind: 7	P052 = 3
	i001:	Display of connector selected in P044.01	[%]	Type: I2
(G121)			0.1%
	i002:	Display of connector selected in P044.02
	i003:	Display of connector selected in P044.03
	i004:	Display of connector selected in P044.04
	i005:	Display of connector selected in P044.05
	i006:	Display of connector selected in P044.06
	i007:	Display of connector selected in P044.07
P044	Connector display:		All connector	Ind: 7	P052 = 3
*	i001:	Selection of connector displayed in r043.01	numbers	FS=0	P051 = 40
			1	Type: L2	Online
(G121)	i002:	Selection of connector displayed in r043.02
	i003:	Selection of connector displayed in r043.03
	i004:	Selection of connector displayed in r043.04
	i005:	Selection of connector displayed in r043.05
	i006:	Selection of connector displayed in r043.06
	i007:	Selection of connector displayed in r043.07
r045	Binector display:		0 to 1	Ind: 4	P052 = 3
(G121)	i001:	Display of binector selected in P046.01		Type: O2
	i002:	Display of binector selected in P046.02
	i003:	Display of binector selected in P046.03
	i004:	Display of binector selected in P046.04
10-10			SIEMENS Energy & Automation
		SIMOREG DC Master Base Drive Panel Operating Instructions