Siemens 6RA70 specifications Overview of abbreviations, 10-3, S00

Overview of abbreviations

Example:

PNU		Description	Value range	No. indices	See
			[Unit]	Factory	Change
			Steps	setting	(Access /
				Type	Status)
P520		Friction at 0% speed	0.0 to 100.0	Ind: 4	P052 = 3
*	1)	Setting as % of converter rated DC current or converter rated torque	[%]	FS=0.0 5)	P051 ≥ 20
			0.1%4)	Type: O2 3)	Online6)
FDS2)
8)	9)
(G153)
	10)

1)An * under the parameter number means that the parameter requires confirmation, i.e. the altered value does not take effect until the P key is pressed.

2)Abbreviation indicating that the parameter belongs to a data set (refers only to indexed parameters) (see Section 9.11 “Switch over parameter sets“)

FDS	Parameter belongs to the function data set	(see Section 9.1, subsection "Data sets")
BDS	Parameter belongs to the BICO data set	(see Section 9.1, subsection "Data sets")

3)Specification of parameter type

O2	Unsigned 16-bit value
I2	Signed 16-bit value
O4	Unsigned 32-bit value
I4	Signed 32-bit value
V2	Bit-coded quantity
L2	Nibble-coded quantity

4)Setting steps for access via PKW mechanism

5)Factory setting

6)Minimum setting required (P052) to allow display of the relevant parameter

Minimum access level required (P051) to allow modification of the relevant parameter Online: The parameter can be changed in all converter operating states

Offline: The parameter can only be changed in converter operating states of ≥ o1.0

8)

S00 Parameter belongs to the technology software in the basic converter, S00 option

9)The "OP parameter number" (i.e. the number to be entered via the OP1S operator panel) is specified in brackets in the "PNU" column for all parameters which are not "P parameters" or "r parameters": e.g. (2010) under n010 or (2100) under U100.

10)The parameter is shown in the specified function diagram in Section 8 (here G153) in SIMOREG DC Master Operating Instructions (6RX1700-0AD76)

SIEMENS Energy & Automation	10-3
SIMOREG DC Master Base Drive Panel Operating Instructions