Toshiba VF-AS1 Easy key function, Quick mode/standard setting mode switching function =

E6581301

5.22EASY key function

￿￿￿

￿￿￿￿

:Registered parameter display selection

:EASY key function selection

￿￿￿￿ ~ ￿￿￿￿ :

Quick registration parameter 1~32

• Function

The following three functions can be assigned to the EASY key for easy operation by means of a single key.

•Setting monitor mode switching function

•Shortcut key function

•Operation panel/remote key function

[Parameter setting]
	Title	Function	Adjustment range	Default setting
			￿: Standard setting mode at time of activation
	￿￿￿ ￿	Registered parameter	of motor	￿
		display selection	￿: Quick mode at time of activation of motor
			￿: Quick mode only
			￿: Quick mode/ standard setting mode
			switching function
			￿:Shortcut key:
					5
			Pressing for 2 sec. to record the parameter,
	￿￿￿￿￿	EASY key function selection	pressing normally to jump to recorded	￿
			parameter (first jump to the 1st history)
			￿:Operation panel/remote key:
			Operation panel by ON
			￿: Monitor peak minimum hold trigger

■Quick mode/standard setting mode switching function (￿￿￿￿=￿)

The EASY key allows you to switch between quick mode and standard setting mode. The way parameters are read out and displayed varies according to the mode selected.

Quick mode

This mode allows you to previously select parameters (max. 32 parameters) whose settings need to be changed frequently and to read them out only. Eight parameters are selected by default; add or remove parameters as required.

Standard setting mode

Standard setting mode in which all parameters are read out.

[How to read out parameters]

To enter the setting monitor mode, set parameter ￿￿￿￿ to ￿, switch to the setting monitor mode using the EASY

key, and then press the		MODE key.
Press the	key or the	key to read out parameters in ascending or descending order.

The relation between the parameter and the mode selected is shown below.

￿￿￿=￿￿

* Standard setting mode at time of activation of motor. Press the EASY key to switch to the quick mode.

￿￿￿=￿￿

* Quick mode at time of activation of motor. Press the EASY key to switch to the standard setting mode.

￿

￿￿￿ =￿￿

*Quick mode (fixed).

* How to cancelxk the Quick mode (￿￿￿ =￿) setting

When this parameter is set to 2 (Quick mode), press and hold down the ENT key for 5 seconds or more.

E-45