! E6581301!

H-11

8
8.4.2 Monitor display at tripping
At the occurrence of a trip, the same information as that di splayed in the mode described in 8.2 .1, “Status monitor
under normal conditions,” can be displayed, as shown in th e table below, if the inverter is not turned off o r reset.
To display trip information after turning off or resetting the inverter, follow the ste ps described in 8.2.2, “Display of
detailed information a past trip.”
■
Example of call-up of trip information
Commun
ication
No.
Item displayed Key
operated
LED
display Description
FC90 Trip information R Status monitor mode (The code blinks if a trip occurs.)
The motor coasts and comes to a stop (coast stop).
- Setting monitor mode
CWJ The first basic parameter “History function (CWJ)” i s
displayed.
FE01 Direction of rotation
HTH The direction of rotation when the trip occurred is
displayed.(H:Forward run, T:Reverse run)
- Frequency command
value  The operation command value when the trip occurred
is displayed.
- Output current E The inverter output current at tripping (load curr ent) is
displayed.
- Input voltage (DC
detection) [ The inver ter DC voltage at the occurrence of a t rip is
displayed.
- Output voltage R The inverter output voltage at the occurrence of a trip
is displayed.
- Torque S
The torque when the trip occurred is displayed.
-
Regenerative braking
resistance overload
factor (PbrOL data)
T
The regenerative braking resistance overload factor at
tripping is displayed.
- Inverter overload
factor (OL1 data) I
The inverter overload factor at tripping is displayed.
- Motor overload factor
(OL2 data) N
The motor overload factor at tripping is displayed.
FE00 Output frequency  The output frequency when the trip occurred is
displayed.
FE06
Input terminal
information 1 
The ON/OFF status of each of the control input
terminals at tripping (F, R, ST, RES, S1, S2, S3,
RR/S4) is displayed in bits.
Input terminal
information 2 C
The ON/OFF status of each of the optional control
input terminals at tripping (LI1, LI2, LI3, LI4) is
displayed in bits.
Input terminal
information 3 D
The ON/OFF status of each of the optional control
input terminals at tripping (LI5, LI6, LI7, LI8) is
displayed in bits.
FE07
Output terminal
information 1 
The ON/OFF status of each of the control output
terminals at tripping (OUT1, OUT2 and FL) is
displayed in bits.
Output terminal
information 2 
The ON/OFF status of each of the optional control
output terminals (OUT3, OUT4, R1, OUT5, OUT6, R2,
R3, R4) is displayed in bits.
FE08 CPU1 version X
The version of the CPU1 is displayed.
FE73 CPU2 version Y
The version of the CPU2 is displayed.
(Continued overleaf)
*1
MODE
[Note 4]
*2
*5
*6
*7
[Note 4]
[Note 5]
*3
[Note 4]
*4
*8
[Note 6]
[Note 3]
MODE